Mobilelock has a built in accelerometer that can detect when your asset begins to move. Sensitivity and filter settings can be customized to fit your exact security needs.
Alerts can be sent if the DS600 tips forwards or backwards or tilts to one side or another. Different degrees of tilt that would create an alarm can be selected by the user and filters can be applied.
MOBILELOCK is equipped with a piezo vibration sensor. Moving the device around will not set it off. It is programmed to pick up sound vibration and performs best when magnetically attached or screwed to metal. Perfect for connex boxes, trailers, AC units, heavy equipment, and appliances. 7 levels of sensitivity can be chosen from depending on the application and filters can be applied that only allow alarms to be sent if multiple hits of vibration are detected within a certain time.
MOBILELOCK is equipped with a plunge tamper on the back. When the device is removed from a mounted surface the tamper button is released and an alarm is created. When selected, tamper alarms will report when the device is armed and disarmed. When someone messes with your device you will know.
If the DS600 MOBILELOCK is connected to its wall charger or the DS525 12/24V connector it can send an alert when power has been cut or the device has been disconnected from that power.
Sensor for High Temperature and Low Temperature can be selected independently. High Temperature reports when the temperature rises above a selected level. Perfect for transporters of perishables that want to be notified when their cooling system fails. Low Temperature reports when the temperature drops below a selected level.
Multiple functions you can choose from:
Power Changes- chirps when plugged in or disconnected from power
Arm/Disarm- chirps and double chirps when you Arm or Disarm the device
Alarm Siren- will sound for 10 to 60 seconds (customizable) when an alarm is tripped.
All Changes- all commands will create a chirp including Status and Locate requests
Page- will operate a loud sonar sound for 1 minute to help you find your device
Siren is 85 db at 1 meter. Three different siren sounds to choose from.
If no settings are selected then device will remain quiet.