Portable Alarm Features

MOBILELOCK devices are run through a secure website. When you receive your MOBILELOCK there are instructions in the box to set up your account online. You can access the site through any computer or smart phone and you can set up an unlimited number of users for your account. Each user has their own login and password and can be assigned different levels of authority: 

• Account Owners can do everything in the account and have access to the billing.  
• Master Users can do everything but do not have access to the billing.  
• Users are only able to Arm, Disarm and request Status' and Locates.  

 

Vibration Sensor:

MOBILELOCK is equipped with a piezo vibration sensor. Moving the device around will not set it off. It is programmed to pick up sound vibrations. It performs best when magnetically attached or screwed to metal. Perfect for connex boxes, trailers, AC units, heavy equipment, and appliances. To reduce false alarms you can choose from one of 7 levels of sensitivity depending on your application and three levels of false alarm filters which only report alarms if multiple hits of vibration are detected. (500Hz random vibration, 1.25G rms temperature)

 

Door Sensor:

MOBILELOCK is sold with a door magnet (DS001) as pictured. Attach to a door frame with its double sided tape, attach the MOBILELOCK next to it within 3/8", select door sensor on the website and when the device is armed you will receive "Door Open" alarms when they seperate and "Door Closed" alarms when they come back together. Perfect for apartments, housing units, remote sheds, safes, IDF cabinets and outdoor gates. Door contact feature not functional when used in DS505 or DS510 or connected to DC power with the DS525.

 

Temperature Sensor:

Sensor for High Temperature and Low Temperature can be selected independently. High Temperature reports when the temperature rises above a selected level. Perfect for transporters of perishables that want to be notified when their cooling system fails. Low Temperature reports when the temperature drops below a selected level. Perfect to alert if concrete is in danger of freezing during the curing stage or if a home's heat system is failing. Transport companies use both sensors together to ensure their precious shipment is maintained at a certain temperature range. Users can customize the temperature settings from 0F-122F (-18C to 50C). Accuracy is +/- 3.6 degrees F.

 

Tamper Sensor:

MOBILELOCK is equipped with a plunge tamper on the back. When the device is removed from a mounted surface the tamper button is released and an alarm is created. When selected, tamper alarms will report when the device is armed and disarmed. When someone messes with your device you will know.

 

Need A Different Sensor?

The DS520 Universal Sensor Input allows you to connect any normally closed sensor to the MOBILELOCK. There is room for one sensor to be hardwired into the DS520 or you can daisy chain several sensors into the same circuit. Use the portability of MOBILELOCK and tie in door sensors, an outdoor motion sensor, gas sensor or a pressure sensor.  We recommend the Optex BX-80nr Indoor/Outdoor motion sensor or the Optex CX-702rs Indoor Motion sensor.  Both have their own battery source and ability to be wired into the DS520.

 

Built in Siren:

Multiple functions you can choose from:

• Power Changes- chirps when you plug it in or disconnect from power
• Arm/Disarm- chirps and double chirps when you arm or disarm the device
• Alarm Siren- will sound for 10 seconds when an alarm is tripped
• All Changes- all commands will create a chirp including Status and Locate requests
• Page- will operate a loud sonar sound for 1 minute to help you find your device

 

Siren is 83 db at 1 meter.  If no settings are selected then device will remain quiet.

Alarm Notifications:

1. Email

2. Text

3. Phone call- If you name your device "Trailer" then that is what our automated voice will say along with what alarm happened and at what time.

You can set up an unlimited number of people to receive alerts and you can designate certain people to recieve only certain alarms. John can receive the low battery alarms and Bill and Jack can receive the vibration and tamper alarms.

4. Central Station- We can send the alarm signals to any central station that accepts Contact ID. A Central Station agent can then call the user 24/7 to alert them that their MOBILELOCK just had an alarm. Additional charges apply. The Central Station must supply the receiver number and account number for each device for this to operate.

 

 

Arm and Disarm:

Just like any other security system MOBILELOCK must be armed to report alarms. Once you select and customize which sensors you wish to use then it's as easy as arming and disarming your device. You can do this three ways:

1. Click "Arm" / "Disarm" buttons in your account either from your laptop or smartphone. A message is sent by SMS (text) to your device and then a confirmation is sent back to your account from the device. You can arm and disarm from both the Account Summary and Configure Unit pages in your account.
2. Set up an Arm/Disarm schedule. When the schedule is submitted your device becomes programmed to automatically arm and disarm to the times you've specified. You can also establish a schedule for a group of devices.
3. Text Arm or Disarm to your device. Click here to see the video on how to do this.

Arming or disarming from the website or by text command will not disrupt a schedule that is in place. If your device is scheduled to arm at 5 pm and you decide to leave early and text an arm command at 4 pm, your device will continue arming and disarming to the schedule.